Freud & Irwin 7 1/4 inch table saw / miter saw blades - 1 NEW 1 Reshapened

Description

This auction is for two 7 1/4-inch table saw or miter saw carbide-tipped saw blades.  One is new and one is resharpened and still covered with wax from the sharpening service
One blade is a Fred Diablo 40-tooth ATB blade with a 5/8-inch bore and a diamond knockout.  It is a thin kerf blade: 1/16-inch [0.067].
The plate thickness is: 0.051-inch, and the hook angle is:  15-degrees The Freud item number is D40.
The other blade is an Irwin Marathon 24-tooth ATB with a 5/8-inch bore and a diamond knockout.  The kerf is 3/32-inch.  The plate is 1/16-inch, and the hook angle is: 15-degrees.  The Irwin item number is 24030.
ATB is alternate top bevel.  This is when tooth tips have alternative high-teeth which means half cut on one side, the rest on the other.  This means that the teeth alternate cutting the wood.  A tungsten carbide tooth usually has a flat face with edges on both sides.  This means that the blade leaves a clean cut on the sides.
The Freud is in its original packaging, while the Irwin is loose and the teeth are still covered with the wax from the sharpening service.  Both were stored in a shop-built blade holder.
Shipping will be via USPS Priority Mail which includes a USPS Tracking Number.  The blades will be packed with a piece of 1/4-inch plywood appropriately sized [8-inches +/-] to ensure the blades do not get damaged.
Pick-up is OK; please bring cash.
Payment: Checks from Bank of America, personal or business, are acceptable. The check has to clear before shipping, which will be quickly as the BoA branch is a block away.  Otherwise its PayPal.
I like an informed buyer, please ask questions.