Feiyu Hyperlink Remote Control Focus Motor Accessories AK4500 Gimbal Stabilizer

Description

Hyperlink Remote Control
Feiyutech Hyperlink Remote Control use to remotely control the basic functions of your AK2000, AK4000, and AK4500 gimbal. The remote is constructed with durable aluminum and covered with a comfortable silica coating to make handling easier, and it features an LCD status display. The controller runs on a single 18650 lithium-ion battery with a 3.7V, 8.1Wh, 2200mAh capacity and lasts approximately 18 hours.
The Hyperlink remote connects to your AK2000, 4000, or 4500 series gimbal using Bluetooth 4.1 and allows you to control multiple functions. With the multifunction knob and the joystick, you can control the up, down, left, and right motion of the camera as well as control leveling, pan follow, pan and tilt follow, and lock modes. It also features a function button to control basic menu configuration and a shutter/record button that allows you to snap stills or record video.
A USB charging cable, an 18650 battery, a smartphone clamp that fits phones 2.2 to 3.3" wide, and a 1/4"-20 adapter are all included.
Key Features:
Control Feiyutech AK2000/AK4000/AK4500 gimbals remotely
Multifunction knob
LCD display
Bluetooth 4.1 connectivity with 32.8 to 49.2' range
Smartphone holder
Constructed with durable aluminum and silica
Approximately 18 hours of battery life with one 18650 3.7V, 2200mAh, 8.1Wh battery
Battery charges with USB Type-C cable in approximately two hours
Modes
:
Pan Follow Mode (HF)
The roll and tilt direction are fixed and the camera moves according to the left-right movements of user's hand
Pan and Tilt Follow Mode (TF)
The roll direction is fixed and the camera moves according to the left-right movements or up-down movements of user's hand
Lock Mode (LK)
The orientation of the camera is fixed
All Follow Mode (AF)
All three axes of the gimbal follow the movements of the user's hand
Function Button
Long press: power on/off
Single tap: switch to LK; single tap again to go back to HF
Double tap: switch to TF; single tap to switch to HF in this mode
Triple tap: switch to AF; single tap to switch to HF in this mode
Shutter Button
When the remote controller is connected with the gimbal successfully, single tap the shutter button to capture, or long-press the shutter button for the camera to record
Settings Button
Single tap this button to find the settings menu, device information, Bluetooth connect/disconnect, gyroscope calibration, knob-sensitivity adjustment
Trigger Button
Long-press-and-hold: switch to motion-sense mode when remote controller connects to gimbal, release this button to exit
Double tap: reset gimbal, three axes return to initial level, and gimbal works in HF Mode
Multifunction Knob
Long-press the multifunction knob to switch to the control of external devices connect with gimbal (this function is not available to the Built-in Zoom/follow focus feature of camera)
Single tap the multifunction knob to switch the control of three axes
Leveling Control Button
Move this button left or right to adjust roll axis movements when the controller connects to gimbal (this function is not available for the AK2000/AK4000)
Joystick
Use the joystick to navigate the configuration menus or move the camera up, right, left, or down
Focus Motor
The FeiyuTech Focus Motor II is designed to be used with the AK2000, AK4000 and AK4500 gimbal. You can install the lens gear above the lens via the rod and cold shoe clip to the camera, or below the lens gear on the right of the lens via the rod and screws onto the gimbal. It has a brushless motor and includes lens gear, a USB Type-C data cable, a clip, an aluminum stick, a carbon fiber stick, and a hex wrench and screws for mounting.
Features
:
Motor calibration
Focus route calibration
Indicator light
Autofocus
Function button
Follow focus sleep mode and reset
Package Included:
1 x FeiyuTech Hyperlink Remote Control for AK4500 Gimbal
1 x Smartphone Mount
1 x 1/4"-20 Thread Adapter
1 x 18650 Battery
1 x USB Type-C Charging Cable
1 x FeiyuTech Follow Focus Motor II for AK4500 Gimbal
1 x Lens Gear
1 x USB Type-C Data Cable
1 x Clip
1 x Hex Wrench
1 x Aluminum Stick
1 x Carbon Fiber Stick
2 x Screws