Catalytic Converter Cleaner oxygen sensor high quality German made oxicat

Description

OXICAT - Oxygen Sensor & Catalytic Converter Cleaner:
OXICAT is a specially developed high-performance cleaner to sustainable and effectively remove, soot and carbon deposits in the entire exhaust tract, especially in the area of the catalyst, the lambda sensor, the turbocharger and the EGR valve. With regular use, it provides protection against renewed contamination, increases fuel efficiency, optimizes the engine performance and ensures the proper functioning of the catalyst and the lambda sensor. Thus OXICAT supports compliance with the emission limits.
ADVANTAGES
- Removes existing deposits
- Provides protection against heavy dirt with regular use
- Provides the engine performance Restores
- Ensuring the proper operation of the oxygen sensor / catalyst / the turbocharger and the EGR valve
- Prevents or eliminates problems that appear on OBD
YouTube Video: https://youtu.be/iMqIu-5iWhI
WHY OXICAT?
Over time, caused by the continued pollution of the installed in the exhaust system components such as the catalyst, oxygen sensor, turbocharger and EGR valve, a significant increase in fuel consumption and the emission of harmful exhaust gases, such.
As carbon monoxide and hydrocarbon. In addition, the engine performance deteriorates noticeably. These problems occur in all vehicles, especially over short distances and for vehicles with exhaust gas recirculation, direct injection and turbochargers, and in areas with poor fuel quality. Often there is OBD (On Board Diagnostic) error messages that are displayed to the driver of his cockpit.
Product properties:
For use in all Gasoline and diesel engines and hybrid vehicles. Recommended use in vehicles that did not pass the emissions test (part of the main investigation) due to excessive exhaust emissions.
Area of application: Regularly every 3-4 months to add to the fuel tank. Observe mixing ratio!!!
Application
Consumption
250 ml or up to 15 Gallons of fuel. Mixing Ratio: 1:300
Reaction time: Drive 40min after adding the product to the fuel tank & every 5min of driving accelerate (punch it) all the way for 10-15 seconds
Note: this product does perfectly the job of cleaning unless your vehicle catalytic converter cracked, broken or melted..
Technical data
Physical state: liquid
Colour: clear/colourless
Odour: characteristic
Flashpoint: ~70 °C (DIN EN ISO 2719)
Density at 68 °F: 0,88 g/cm³ (DIN 51757)
Water resistant